Coleção de Normas ISO para Guindastes

Disclaimer: Não há relação de qualquer espécie com a ISO e/ou suas licenciadas e afiliadas ou qualquer ganho comercial ou financeiro caso você se interesse em adquirir quaisquer das normas listada neste post / There is no relationship of any kind with ISO and/or its licensees and affiliates or any commercial or financial gain should you may be interested in purchasing any of the standard listed in this post

Em continuidade ao último post sobre normas técnicas ligadas aos cabos de aço, trazemos reunimos uma coletânea bastante abrangente de normas ISO sobre guindastes em geral.

Esta coleção de mais de 100 Normas Internacionais relacionadas a guindastes será útil para projetistas, fabricantes, proprietários, operadores, vendedores, inspetores, consultores, autoridades de guindastes, reguladores e consultores.

Os padrões referem-se a guindastes móveis, de torre, de ponte, de pórtico e de lança, e abrangem terminologia, princípios e requisitos de projeto, uso, operação e manutenção, classificação de carga, testes e segurança.

ISO Standards collection: Cranes

Atenção: Caso tenha interesse por alguma norma específica na listagem abaixo, certifique-se de que você está consultando a última versão do documento e que a referida norma não tenha sido substituída por outra versão/número. / Attention: If you are interested in any specific standard in the list below, make sure that you are consulting the latest version of the document and that said standard has not been replaced by another version/number.

ISO 2374 Lifting appliances — Range of maximum capacities for basic models
ISO 3864-1 Graphical symbols — Safety colors and safety signs — Part 1: Design principles for safety signs in workplaces and public areas
ISO 3864-2 Graphical symbols — Safety colors and safety signs — Part 2: Design principles for product safety labels
ISO 3864-3 Graphical symbols — Safety colors and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
ISO 4301-1 Cranes and lifting appliances — Classification — Part 1: General
ISO 4301-2 Cranes — Classification — Part 2: Mobile cranes
ISO 4301-3 Cranes — Classification — Part 3: Tower cranes
ISO 4301-4 Cranes and related equipment — Classification — Part 4: Jib cranes
ISO 4301-5 Cranes — Classification — Part 5: Overhead traveling and portal bridge cranes
ISO 4302 Cranes — Wind load assessment
ISO 4304 Cranes other than mobile and floating cranes — General requirements for stability
ISO 4305 Mobile cranes — Determination of stability
ISO 4306-1 Cranes — Vocabulary — Part 1: General
ISO 4306-2 Cranes — Vocabulary — Part 2: Mobile cranes
ISO 4306-3 Cranes — Vocabulary — Part 3: Tower cranes
ISO 4306-5 Cranes — Vocabulary — Part 5: Bridge and gantry cranes
ISO 4308-1 Cranes and lifting appliances — Selection of wire ropes — Part 1: General
ISO 4308-2 Cranes and lifting appliances — Selection of wire ropes — Part 2: Mobile cranes — Coefficient of utilization
ISO 4309 Cranes — Wire ropes — Care, maintenance, installation, examination and discard
ISO 4309/Amd 1 Cranes — Wire ropes — Care, maintenance, installation, examination and discard — Amendment 1
ISO 4310 Cranes — Test code and procedures
ISO 7296-1 Cranes — Graphic symbols — Part 1: General
ISO 7296-1/Amd 1 Cranes — Graphic symbols — Part 1: General — Amendment 1
ISO 7296-2 Cranes — Graphical symbols — Part 2: Mobile cranes
ISO 7296-3 Cranes — Graphical symbols — Part 3: Tower cranes
ISO 7363 Cranes and lifting appliances — Technical characteristics and acceptance documents
ISO 7752-1 Lifting appliances — Controls — Layout and characteristics — Part 1: General principles
ISO 7752-2 Lifting appliances — Controls — Layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes
ISO 7752-2/Add 1 Lifting appliances — Controls — Layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes — Addendum 1
ISO 7752-3 Cranes — Controls — Layout and characteristics — Part 3: Tower cranes
ISO 7752-4 Cranes — Controls — Layout and characteristics — Part 4: Jib cranes
ISO 7752-5 Lifting appliances — Controls — Layout and characteristics — Part 5: Overhead traveling cranes and portal bridge cranes
ISO 8087 Mobile cranes — Drum and sheave sizes
ISO 8566-1 Cranes — Cabins — Part 1: General
ISO 8566-2 Cranes — Cabins — Part 2: Mobile cranes
ISO 8566-3 Cranes — Cabins — Part 3: Tower cranes
ISO 8566-4 Cranes — Cabins — Part 4: Jib cranes
ISO 8566-5 Cranes — Cabins — Part 5: Overhead traveling and portal bridge cranes
ISO 8686-1 Cranes — Design principles for loads and load combinations — Part 1: General
ISO 8686-2 Cranes — Design principles for loads and load combinations — Part 2: Mobile cranes
ISO 8686-3 Cranes — Design principles for loads and load combinations — Part 3: Tower cranes
ISO 8686-4 Cranes — Design principles for loads and load combinations — Part 4: Jib cranes
ISO 8686-5 Cranes — Design principles for loads and load combinations — Part 5: Overhead traveling and portal bridge cranes
ISO 9373 Cranes and related equipment — Accuracy requirements for measuring parameters during testing
ISO 9374-1 Cranes — Information to be provided — Part 1: General
ISO 9374-3 Cranes — Information to be provided for enquiries, orders, offers and supply — Part 3: Tower cranes
ISO 9374-4 Cranes — Information to be provided — Part 4: Jib cranes
ISO 9374-5 Cranes — Information to be provided — Part 5: Overhead traveling cranes and portal bridge cranes
ISO 9926-1 Cranes — Training of drivers — Part 1: General
ISO 9926-3 Cranes — Training of drivers — Part 3: Tower cranes
ISO 9927-1 Cranes — Inspections — Part 1: General
ISO 9927-3 Cranes — Inspections — Part 3: Tower cranes
ISO 9928-1 Cranes — Crane driving manual — Part 1: General
ISO 9928-2 Cranes — Crane driving manual — Part 2: Mobile crane operators
ISO 9942-1 Cranes — Information labels — Part 1: General
ISO 9942-3 Cranes — Information labels — Part 3: Tower cranes
ISO 10245-1 Cranes — Limiting and indicating devices — Part 1: General
ISO 10245-2 Cranes — Limiting and indicating devices — Part 2: Mobile cranes
ISO 10245-3 Cranes — Limiting and indicating devices — Part 3: Tower cranes
ISO 10245-4 Cranes — Limiting and indicating devices — Part 4: Jib cranes
ISO 10245-4/Cor 1 Cranes — Limiting and indicating devices — Part 4: Jib cranes — Technical Corrigendum 1
ISO 10245-5 Cranes — Limiting and indicating devices — Part 5: Overhead traveling and portal bridge cranes
ISO 10571 Tyres for mobile cranes and similar specialized machines
ISO 10972-1 Cranes — Requirements for mechanisms — Part 1: General
ISO 10972-2 Cranes — Requirements for mechanisms — Part 2: Mobile cranes
ISO 10972-3 Cranes — Requirements for mechanisms — Part 3: Tower cranes
ISO 10972-4 Cranes — Requirements for mechanisms — Part 4: Jib cranes
ISO 10972-5 Cranes — Requirements for mechanisms — Part 5: Bridge and gantry cranes
ISO 10973 Cranes — Spare parts manual
ISO 11629 Cranes — Measurement of the mass of a crane and its components
ISO 11630 Cranes — Measurement of wheel alignment
ISO 11660-1 Cranes — Access, guards and restraints — Part 1: General
ISO 11660-2 Cranes — Access, guards and restraints — Part 2: Mobile cranes
ISO 11660-3 Cranes — Access, guards and restraints — Part 3: Tower cranes
ISO 11660-5 Cranes — Access, guards and restraints — Part 5: Bridge and gantry cranes
ISO 11661 Mobile cranes — Presentation of rated capacity charts
ISO 11662-1 Mobile cranes — Experimental determination of crane performance — Part 1: Tipping loads and radii
ISO 11994 Cranes — Availability — Vocabulary
ISO 12210-1 Cranes — Anchoring devices for in-service and out-of-service conditions – Part 1: General
ISO 12210-4 Cranes — Anchoring devices for in-service and out-of-service conditions – Part 4: Jib cranes
ISO 12210-4/Cor 1 Cranes — Anchoring devices for in-service and out-of-service conditions – Part 4: Jib cranes — Technical Corrigendum 1
ISO 12478-1 Cranes — Maintenance manual — Part 1: General
ISO 12480-1 Cranes — Safe use — Part 1: General
ISO 12480-3 Cranes — Safe use — Part 3: Tower cranes
ISO 12480-4 Cranes — Safe use — Part 4: Jib cranes
ISO 12482-1 Cranes — Condition monitoring — Part 1: General
ISO 12485 Tower cranes — Stability requirements
ISO 12488-1 Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
ISO 12488-1/Cor 1 Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General — Technical Corrigendum 1
ISO 12488-4 Cranes — Tolerances for wheels and travel and traversing tracks — Part 4: Jib cranes
ISO 13200 Cranes — Safety signs and hazard pictorials — General principles
ISO 13202 Cranes — Measurement of velocity and time parameters
ISO 14518 Cranes — Requirements for test loads
ISO 15442 Cranes — Safety requirements for loader cranes
ISO 15513 Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors
ISO/TS 15696 Cranes — List of equivalent terms
ISO/TR 16880 Cranes — Bridge and gantry cranes — International Standards for design and manufacturing requirements and recommendations
ISO 16881-1 Cranes — Design calculation for rail wheels and associated trolley track supporting structure — Part 1: General
ISO/TR 19961 Cranes — Safety code on mobile cranes
ISO 20332 Cranes — Proof of competence of steel structures
ISO 22986 Cranes — Stiffness — Bridge and gantry cranes
ISO 23813 Cranes — Training of appointed persons
ISO 23814 Cranes — Competency requirements for crane inspectors
ISO 23815-1 Cranes — Maintenance — Part 1: General
ISO 23853 Cranes — Training of slingers and signallers
ISO/TR 25599 Cranes — Jib cranes — International Standards for design, manufacturing, use and maintenance requirements and recommendationsISO/TR 27245 Cranes — Tower cranes — International Standards for design, manufacture, use and maintenance requirements and recommendations

Rope, the wire.